VRF, VWV and water-loop systems
PVRF variable refrigerant flow, the Petra VWV chilled-water system, and the ESC water-loop heat pump system with PDC dry coolers.

Three system approaches for buildings where central plant and ductwork are not the best fit. VWV uses a small chiller with chilled-water fan coils and uses about 25% less power than an equivalent DX system. ESC puts a water-source heat pump in each space on a shared water loop, so heat moves between zones and each tenant pays for their own use.
System range
| System | Principle | Capacity | Notes |
|---|---|---|---|
| PVRF | Variable refrigerant flow, DC inverter, R-410A | 25.2 – 45 kW per outdoor module | Up to 64 indoor units; 50–130% connection ratio |
| VWV | RWC chiller with variable-speed pump and chilled-water fan coils | Indoor units 1 – 5 TR | Up to 55 °C ambient; no height or pipe-length limits |
| ESC | Water-source heat pumps on a closed 2-pipe loop | 5 – 98 kW | Heat recovery between zones; no outdoor units on the facade |
| PDC | Dry cooler | 11 – 1,419 kW | V-bank Cu/Al coils; low-noise axial fans with VFD |
Capacities at 50 Hz.
Petra VWV: engineering advantages
| Piping | No height or pipe-length limits between indoor and outdoor units |
|---|---|
| Modulation | Load modulation down to 1% with no oil-return issues |
| Fresh air | Can supply 100% fresh air |
| Service | Leaks are easy to detect and repair |
| Indoor units | Concealed, cassette, universal and wall types, each with its own thermostat |
| Controls | Factory-mounted, factory-commissioned controls |
Ask for the catalogue and selection data for this range. Contact



Send us your specifications
We return an equipment selection, a technical submittal and a commercial offer.